TSL vertical&horizontal rotary table is one of the main accessory of milling machine, it is used for index boring ,milling,
 circle cutting, spot facing and boring hole etc on milling machine.Rotary table in vertical with tailstock working together,
it can used on complex work for circle index boring and milling.
As clients’ special requirements, the TSL with left handwheel can be offered.

Specification

	ERT-HV6(TSL)	ERT-HV8(TSL)	ERT-HV10(TSL)	ERT-HV12(TSL)	ERT-HV14(TSL)	ERT-HV16(TSL)
Table diameter mm	Φ150	Φ160	Φ250	Φ300	Φ150	Φ400
Morse taper of the center hole	3#			4#	4#	4#
Height of center for Verti. mounting mm	100	135	165	195	230	260
width of the T-slot mm	12			14
Adjacent angle of table T-slot	90°		60°
Width of the locating key mm	16					18
Modules of worm and worm gear	1.5		2	2.5		3.5
Transmission ratio of the  worm gear	0.10416666667
Graduation of the table	360°
Rotating angle of table with one revolution of the worm	4°(1' per graduation)
Minimum value of vernier	10"
Indexing accuracy	80”		60”
Max.bearing(with tabele Hor.)kg	100	150	200	250	300	350
Max.bearing(with table Vert.)kg	50	75	100	125	150	175

DIMENSIONAL SKETCH


TSL Installation sketch and dimensions

	TSL150(HV-6)	TSL200(HV-8)	TSL250(HV-10)	TSL300(HV-12)	TSL350(HV-14)	TSL400(HV-16)
A	200	265	325	388	450	525
B	160	220	280	330	390	450
C	100	135	165	195, , , , , , , , , <, /TD>	230	260
D	Φ150	Φ200	Φ250	Φ300	Φ350	Φ400
E	16					18
G	17
H	83	105	115	135	138	150
J	10	10	15
M	MT2	MT3	MT4
N	78	98	113	133	128	145
Net weight kg	14	28	43	71	83	93
Gross weight kg	15	30	45	73	85	95
Case dimensions	27×24×13	38×30×16	45×35×18	55×45×19	55×48×19	55×50×20